Customer Support: 0208 672 1086

TIMco

Newest Items First
40 Per Page
Addax Keyless Chuck & SDS Adaptor
Contact us for a price  
A keyless hand-tightened three jaw chuck that fits drills with 1/2" shaft. Ideal for impact drills up to 750 watt. Complete with an SDS plus adaptor. Suitable for 1.5mm - 13mm drill bits.
In stock
TIMco Assorted Flat Packers 1mm to 6mm
Contact us for a price  
A solution for multiple applications, used to ensure correct weight distribution of glazed units and increase security around fixing points during frame fitting. Polyproplene material, resistant to weather changes. Waterproof, strong and durable. Approximately 200 in a bag from 1mm to...
In stock
TIMco General Purpose Woodscrews 1200pc Grab Pack
Contact us for a price  
***AMAZING VALUE*** A 1200 piece assortment of general purpose woodscrews, ideal for fixing softwood, chipboard, plastic and hardwoods. 1200 screws consisting of the following sizes: 3.5 x 16, 3.5 x 20, 3.5 x 25 4 x 30, 4 x 40, 4 x 50 5 x 50, 5 x 60, 5 x 80
In stock
Phillips
Addax V5 Impact Pozi Driver Bits
Contact us for a price  
V5 steel has been specifically designed to withstand the extreme pressures of an impact driver. This durable hardened and patented bit will extend the lifespan and gives optimum performance in all impact applications. Pack Qty: 10
In stock
Addax Roll Forged Jobber Drills
Contact us for a price  
An economic HSS drill used for drilling all non-alloy materials The 135° split point prevents the bit drifting Black oxide finish Manufactured to DIN338 Pack Qty: 5 or 10
In stock
Addax HSS M2 Ground Jobber Drills
Contact us for a price  
Manufactured from a high grade M2 tool steel This durable engineering quality drill will give a consistant rapid perfermance into all non-alloy materials The 135° split point prevents the bit from drifting Fully ground from solid material Manufactured to DIN338 Dimensionally precise Pack...
In stock
Addax Two Piece Adaptor
Contact us for a price  
An economic magnetic 1/4" hex drive adaptor manufactured from two pieces of carbon steel.
In stock
Addax AA4 Holesaw Arbor
Contact us for a price  
Holesaw arbors including pilot drill for holesaws ranging from 14mm to 30mm diameter Pack Qty: 1
In stock
Addax AA2 Holesaw Arbour
Contact us for a price  
Holesaw arbors including pilot drill for holesaws ranging from 32mm to 210mm diameter Pack Qty: 1
In stock
TIMco Light Section Steel Hex Head Self-Drilling Screws (Box of 100)
Contact us for a price  
For joining roofing sheets to light gauge steel For use in urban & industrial areas with a low salt atmosphere Supplied with EPDM washer Box Qty - 100
In stock
Countersunk
TIMco Machine Screws (Box of 100)
Contact us for a price  
Countersunk or Pan Head available Metric thread Box Quantity - 100
In stock
TIMco Masonry Nails
Contact us for a price  
A selection of zinc plated masony nails Bag Qty: 50
In stock
Addax HSS Cobalt Jobber Drill Bits
Contact us for a price  
Manufactured from a high quality M35 grade steel. Ideal for drilling holes into stainless steel and other alloy materials. The 135 ° split point eradicates the need to pre-drill and prevents the bit from drifting. Pack Qty: 5 or 10
In stock
TIMco Loose Bolt Shield Anchors
Contact us for a price  
Ideal for fixing through the fixture once the shield has been installed into substrate. Compatible with most types of metric threaded components. A three segmented expansion achor used in concrete, brick or stone. Torque controlled. Various bag sizes
In stock
TIMco In-Dex Wafer Head Timber Screws (Box)
Contact us for a price  
Designed for decking, stairs, fences, roofing and landscaping. Coated with a patented multi-layer corrosion resistant plating this screw is ideal for outdoor applications.
In stock
TIMco Heavy Section Steel Wing Tip Self Drilling Screws
Contact us for a price  
Specifically designed to attach wood to metal (max 12mm). Fine self tapping thread with wings designed to ream out the timber, so the screw can achieve max RPM without burning out. When the wings hit the metal they will break off to permit the thread to self tap into the metal.
In stock
TIMco Heavy Section Steel Hex Head Self-Drilling Screws (Box of 100)
Contact us for a price  
For joining roofing sheets to light gauge steel For use in urban & industrial areas with a low salt atmosphere Supplied with EPDM washer Box Qty: 100
In stock
Addax Flat Wood Bits
Contact us for a price  
The twin cutting edged and integral centre point enhances speed and provides rapid chip removal when drilling various types of timber and man-made boards. Three point deisng for faster, cleaner holes Bright finish Compound angle, ground recessed cutting edge for superior cutting 1/4" Quick...
In stock
Addax TCT Tile & Glass Bits
Contact us for a price  
For accurate drilling of glass and ceramics. Use the bit in ROTARY MODE ONLY at a low RPM. A lubricant such as water or turpentine is recommended when drilling glass. Pack Qty: 1
In stock
Addax Masonry Drill Bits
Contact us for a price  
A premium quality masonry bit for use in cordless and corded drill drivers in both rotary and hammer action. 135 degree high grade industrial carbide tip Ground flute Silver/black finish Heat treated Pack Qty: 1
In stock
Addax Professional SDS Plus Hammer Bits
Contact us for a price  
A high performance drill bit with a superior European carbide tip to give extended durability. German tested and PGM approved to ensure the bits drill with dimensional precision and performance when used in concrete and masonry. Pack Qty: 1
In stock
TIMco Roofing Bolt & Nut
Contact us for a price  
Manufactured with a large flat head, making it ideal for clamping thin sheet metal, plastic and wood. For other quantities, please contact our sales team on 0208 672 1086.
In stock
TIMco Frame Fixings
Contact us for a price  
A versatile and reliable fixing for attaching to brick, block, stone, masonry and concrete.
In stock
TIMco Hammer Fixings
Contact us for a price  
A light duty hammer-set through fixing for masonry. 200 per box.
In stock
TIMco Metal Speed Plugs
Contact us for a price  
A rapid light duty plasterboard fixing for use in a wide range of applications. Cross-recess head, allows simple installation with a screw driver. Metal plugs come with screws. Plug: 31.5mm Screw: 4.5mm x 30mm Bag Qty: 75
In stock
TIMco Clout Nails
Contact us for a price  
Perfect for roofing applications. Bag weight of 500g
In stock
TIMco Oval Nails
Contact us for a price  
Used where strength is essential. 500g
In stock
TIMco Panel Pins
Contact us for a price  
A lightweight nail, commonly used for cabinet making and light duty applications. Bag weight of 500g
In stock
TIMco Round Wire Nails
Contact us for a price  
Used where strength is essential. Bag Qty: 500g
In stock
TIMco Annular Ringshank Nails
Contact us for a price  
Annular rings provide additional holding power, where increased grip is required. Bag weight of 500g
In stock
TIMco Classic Multi-Purpose Screws (Box)
Contact us for a price  
The TIMco Multi-Purpose Classic Screw enables the user to rely on one product for a variety of applications. Specifically designed as a multi-purpose product, the 25° sharp point, special thread design, lubrication and corrosion resistant plating ensures the screw will consistently perform...
In stock
TIMco Fine Thread Zinc Drywall Screws (Box)
Contact us for a price  
Bugle head designed to not damage the plasterboard during installation. Fully threaded up to 50mm partially threaded thereafter. Used to secure plasterboard to drywall track and ceeiling track systems.
In stock
TIMco Penny Washers
Contact us for a price  
A large diameter washer ideal for spreading the clamping load, reducing a hole diameter and packing out. Various bag sizes
In stock
TIMco In-Dex Hex Head Timber Screws (Box of 50)
Contact us for a price  
Designed as an alternative to the traditional Coach screws mainly used for timber to timber applications. Coated with a patented multi-layer corrosion resistant plating this screw is ideal for outdoor applications. Box Qty. - 50
In stock
TIMco Light Section Steel Wing Tip Self Drilling Screws
Contact us for a price  
Specifically designed to attach wood to metal (max 12mm). Fine self tapping thread with wings designed to ream out the timber, so the screw can achieve max RPM without burning out. When the wings hit the metal they will break off to permit the thread to self tap into the metal.
In stock
TIMco Velocity Multi-Use Screws (Box)
Contact us for a price  
The unique patented Velocity screw has been specifically designed to give rapid installation into many different materials, whilst achieving exceptional pull out resistance. It has been designed to give the user a consistent and reliable product that can be used in a variety of applications....
In stock